Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - ksport hydro ebrake diy install

AzNCmB · 01-09-2011, 08:42 PM

***UPDATE***

last update was nov. 18 2010, i've driven the car daily...drove it to houston on nov. 28 for a drift event, drove home, and have been driving and having fun with the car ever since. I'm from new orleans...

***important bleeding proceedure***
since the last update, all i did was bleed the system according to fsm, but before then, i had to unbolt the ksport and flip it right side up so that no air would be trapped in the master when bleeding.

before driving to houston, all i did was secure the lines with some radiator hosing so that they wouldnt rubb n cheff after some time.

also removed all of the oem ebrake parts.
lines, shoes, clips, springs, evvrything!

01-09-2011, 08:42 PM	#12
AzNCmB Zilvia FREAK! Join Date: Jan 2003 Location: NOLA Age: 40 Posts: 1,144 Trader Rating: (2)	update - Bleed & Remove oem ebrake *UPDATE* last update was nov. 18 2010, i've driven the car daily...drove it to houston on nov. 28 for a drift event, drove home, and have been driving and having fun with the car ever since. I'm from new orleans... *important bleeding proceedure* since the last update, all i did was bleed the system according to fsm, but before then, i had to unbolt the ksport and flip it right side up so that no air would be trapped in the master when bleeding. before driving to houston, all i did was secure the lines with some radiator hosing so that they wouldnt rubb n cheff after some time. also removed all of the oem ebrake parts. lines, shoes, clips, springs, evvrything! __________________ duh mah! wheels and suspension!