Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Options13 · 01-26-2011, 11:42 PM

alright so i attempted to install my alarm today its a viper 5901 with remote start..

i used this website right here

1989-90 Nissan 240 SX Alarm, Remote Starter, Keyless Entry Wiring Information

heres the first 12 pin main connector

a couple things i don't get... the input and output confuse me..

first off, the red/white aux trunk output, goes to the red wire (light in trunk) right?

(white/brown) parking light isolation, does that go to parking light (red/blue) wire in my light switch? there is also another "parking light output" (white) wire does that go to the (red/blue) wire on my light switch also?

im assuming ORANGE and BLACK both just get grounded?

and as for "trunk pin instant trigger" is that this thing? if so i just run the blue wire to it right?

01-26-2011, 11:42 PM	#1
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43)	for all you alarm junkies alright so i attempted to install my alarm today its a viper 5901 with remote start.. i used this website right here 1989-90 Nissan 240 SX Alarm, Remote Starter, Keyless Entry Wiring Information heres the first 12 pin main connector a couple things i don't get... the input and output confuse me.. first off, the red/white aux trunk output, goes to the red wire (light in trunk) right? (white/brown) parking light isolation, does that go to parking light (red/blue) wire in my light switch? there is also another "parking light output" (white) wire does that go to the (red/blue) wire on my light switch also? im assuming ORANGE and BLACK both just get grounded? and as for "trunk pin instant trigger" is that this thing? if so i just run the blue wire to it right?