Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

JonGu · 01-30-2011, 11:50 PM

86.5mm would be oversize pistons since the factory bore is 86.0mm

You would need to bore and hone the block if you wanted to use those pistons. You will need to send it off to a machine shop. Don't be cheap, do it once do it right.

01-30-2011, 11:50 PM	#2
JonGu Leaky Injector Join Date: Feb 2008 Location: Houston, TX Posts: 95 Trader Rating: (5)	86.5mm would be oversize pistons since the factory bore is 86.0mm You would need to bore and hone the block if you wanted to use those pistons. You will need to send it off to a machine shop. Don't be cheap, do it once do it right.