Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Bbsalexaz · 02-12-2011, 10:40 AM

I was driving in the middle lane down a 3 lane road. Switched to the outside lane, then accelerated to the speed limit. At that point I got cut off by an F-150 and forced off the road into a curb. Damaging 2 wheels, 2 tires, fron LCA, tie rod ends, and my ego

.

So I found a good deal on an LCA, free

but shot bushings... >_<

Then I found this on ebay. Linky

What I'm wonding, since I haven't really taken a look, are the Lca's ball joints able to be removed? If so, I will cheap out one time before I get all my spl goodies. I just need to get around for a couple months until I get a DD.

02-12-2011, 10:40 AM	#1
Bbsalexaz Zilvia Member Join Date: Aug 2010 Location: Bay Area, CA Posts: 192 Trader Rating: (0)	So I got ran off the road... I was driving in the middle lane down a 3 lane road. Switched to the outside lane, then accelerated to the speed limit. At that point I got cut off by an F-150 and forced off the road into a curb. Damaging 2 wheels, 2 tires, fron LCA, tie rod ends, and my ego. So I found a good deal on an LCA, free but shot bushings... >_< Then I found this on ebay. Linky What I'm wonding, since I haven't really taken a look, are the Lca's ball joints able to be removed? If so, I will cheap out one time before I get all my spl goodies. I just need to get around for a couple months until I get a DD.