Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

AutoRnD · 02-02-2004, 01:52 PM

ok.. well i will post some info on the zeals then...
this info will be for the nissan s13 240sx... with us specs..
for all zeals
the front upper mounts are pillow ball type while as the rear are just aluminum rigid.. they are 6 way adjustable and very easy to see your adjustments..not a clicking system but actual number systems. all zeals shocks are monotube with either 42-46 mm piston sizing dependig on car...

first off.. there is the baseline
zeal b2 coilover.. their msrp is 1658 and you have a choice of either 6/5k spring rate for street or 8/7k spring rate for track.. the shell casing is spring type and is single height adjust by raising and lowering the spring seat lock. they run a Id60 basic spring

Zeal function b6 are 2142.00 and their springs rates are 6/5 or 8/7... they aresingle monotube with free div piston (go figure) the shell casing is chromoly coated steel and runs a id60 basic spring as well.. but these bad boi's are double adjustable.. like tein he or jic flta2

zeal Function V6 list for 2237.99 and they are also 6/5 or 8/7...they are identical to the s6 except that the front is inverted.

zeal function s6 list for 2500 and are also 6/5 or 8/7 but they use id60 swift springs which are supposed to be better than the basic..and the shell casing is all aluminum with double height adjust.

zeal function d list for 2600 and are 9/6 spring rates.. they use id60 swift springs .. front is inverted and the shell casing is chromoly coated steel front and rear is aluminum

Then The racer / Most expensive is the super function they list for 2720.00 and have a spring rate of 10/8k using id60 swift springs. They have pillow ball front and rear and are all aluminum but these are meant for track use only...

with all zeal products bought through a us distributor of endless usa
they come with a 1 yr warranty card.. the coilovers are already assembled and set to endless usa's recomended ride height. the coilovers if anything were to happen to them are rebuilt in the usa.. and can be done very quickly ... ok that is all i have to say... without getting tooo biased cause i sell them...

02-02-2004, 01:52 PM	#6
AutoRnD Post Whore! Join Date: Nov 2003 Location: SF BAY AREA, CA Posts: 2,601 Trader Rating: (1)	ok.. well i will post some info on the zeals then... this info will be for the nissan s13 240sx... with us specs.. for all zeals the front upper mounts are pillow ball type while as the rear are just aluminum rigid.. they are 6 way adjustable and very easy to see your adjustments..not a clicking system but actual number systems. all zeals shocks are monotube with either 42-46 mm piston sizing dependig on car... first off.. there is the baseline zeal b2 coilover.. their msrp is 1658 and you have a choice of either 6/5k spring rate for street or 8/7k spring rate for track.. the shell casing is spring type and is single height adjust by raising and lowering the spring seat lock. they run a Id60 basic spring Zeal function b6 are 2142.00 and their springs rates are 6/5 or 8/7... they aresingle monotube with free div piston (go figure) the shell casing is chromoly coated steel and runs a id60 basic spring as well.. but these bad boi's are double adjustable.. like tein he or jic flta2 zeal Function V6 list for 2237.99 and they are also 6/5 or 8/7...they are identical to the s6 except that the front is inverted. zeal function s6 list for 2500 and are also 6/5 or 8/7 but they use id60 swift springs which are supposed to be better than the basic..and the shell casing is all aluminum with double height adjust. zeal function d list for 2600 and are 9/6 spring rates.. they use id60 swift springs .. front is inverted and the shell casing is chromoly coated steel front and rear is aluminum Then The racer / Most expensive is the super function they list for 2720.00 and have a spring rate of 10/8k using id60 swift springs. They have pillow ball front and rear and are all aluminum but these are meant for track use only... with all zeal products bought through a us distributor of endless usa they come with a 1 yr warranty card.. the coilovers are already assembled and set to endless usa's recomended ride height. the coilovers if anything were to happen to them are rebuilt in the usa.. and can be done very quickly ... ok that is all i have to say... without getting tooo biased cause i sell them... __________________ www.AutoRnD.com Nardi, Enkei, Stance, AME Master Distributors for USA Check Out Our Facebook!