|
I have a s14 with a s14 blk top. I installed a ka ac compressor. I had to fab.a bracket to make it fit. I had one bolt kinda line up but it would not allow for a correct belt lineup. I encountered a problem with the s14 ac low pressure line fitting. It won't unless you mod it. I cut the line and removed the small ball like chamber. I had the system charged and found out it had too much pressure on the low press side. So I had to reinstall the ball as I was informed it's a pressure reducer. I have yet to have it vac and recharged. The alignment on the lp side fitment in the compressor seems to be critical. If not aligned properly it will blowout and leak. It appears to a poor setup.
|