[holemilk00]

Lots got done this weekend. We got the holes welded up and smoothed with body filler. We also fixed where the previous owner had hit something small and knocked the lower driver side of the radiator core support loose from the frame. Got it all fixed and back better than factory and ready for the next step. Then we painted the bay with SEM etching primer and then a sand-able primer. Now we just have to find time to sand it all down with 400 grit and get it all smooth with multiple coats of primer and ready for paint. Here are some pics from the weekend.







Fixing the core support







Getting every thing all ready.





And then the first coat of SEM etching primer to see where we were at after the body filler and sanding.



Radiator core support all fixed up, all rust removed, and back where it belongs.



The pics don't do it justice, but it is actually smooth. I guess the primer makes it look bad in pics.



And finally a box of super secret awesome parts.