Quote:
Originally Posted by HS13KLS
yo!
So check it out. I have a s14 too pretty low, stance +pros yadda yadda. 18x9.5-5 up front. 225/35 tire. -4.1 degress of camber. 7 degrees of caster.
I had the same problem. when you have the entire kit on is your toe messed up at all?
I used z32 inners, CS outters, that "50 dollars ps rack spacer" by GEORGE and I had too much angle/toe. (I had the same problem where the wheels wouldnt hit the bumpstop, but hit the tension rods instead) I ended up needing to take that damn spacer off, put those 7mm PBM spacers on and cutting my inner tie rods about. 7 threads on each side.
(Ive looked at the SAK and it looked pretty similar to the setup that I just pieced together)
|
Yeah I have a rack spacer too, it came with the Stance Super Angle outter tie rods. I have the PSM inner tie rods as well, which I have cut about 22mm off of the passenger side for the rack spacer to work. Either way, I'm just adding up to my bump stops because if I run spacers the wheel will rub everything all over, to include the firewall...
Either way, that's my plan for the angle issue, I'm going to make larger bumpstops.
However, at this point my car still has an unstable floating feeling. I'm going to go in as soon as possible and get an alignment, and hopefully it fixes itself. Unless anyone else has any other ideas...