[cotbu]

You should consult a tech though pm then post the progress here. I've seen the fuel lines like Sileighty_85, that's a common mistake. You are going to fry your ecu's fuel pump trace with the 11.55 disconnect that wire now! it should be grounded by the ecu.

turn your ignition on and ground that wire to the chassis (fuel pump relay side) the fuel pump should come on that wire should run to pin 104 on the ecu.
for the rest of the harness i have no clue where to start! So that means I would have you start from scratch. Which guide did you use? Maybe its something simple like main power wires.