[lawrenceyang]

just got these put on yesterday through much effort on part by BestTint rolling/pulling my fenders. got the 9.75x17 all around in 245/40/17 but ran into a couple problems. first off my wheels studs were too small to fit a +10mm spacer like i had hoped so i went with +5 all around. rear fit fine with a pull with a good amount of space in between. the problems were the fronts. even after a roll we couldnt get it to work with a +5mm because it was rubbing. maxed out the camber on the front (with only coilovers) to as far as they would go. backed up and heared the inside of the wheel rubbing the coilovers. put on +3mm spacers but they BARELY fit but its dandy now. morale of the story is to get smaller tires in the front -_____- pics in a couple hours after work