Quote:
Originally Posted by Jybfan04
Purchased a Emance data cable a year and some change ago, didn't work shipped it back to him and he said it should work. Got it back tried it on my 98 Nissan altima and it didn't work, months later had my mechanic try it on my 91 240sx with sr20det redtop swap and it would still not work. During this period I had purchased over 3 tunes from him. This first set I sold to my buddy who got it sent back to Emance for a t28 retune. The worked pretty decent for what it was. Got another ecu resent that to him traded him some guages a fuel rail and 60 bucks for a daughterboard wih a tune. Went through at least 3 tunes and none of them would idle right. Tried to work with the guy to get the issue resolved until he just quit on me. I still have the chips, and plan on pulling the tune to see how it looks. As of now this guy in my opinion CS is the worst. I had better success of contacting Enthalpy as well as Smelly240 who was able to get my car spot on. For basic t28 and t3/t4 tunes with common size injectors I think he does somewhat decent. However when it came to getting my car running right the guy just crapped on me. So much for getting A1 service.
|
Had a lot of issues in the past, especially with customers buying the cheapest and in most cases (crappiest) setups including funky injectors, maf combos. if you plan on your setup working good then i recommend emailing me first and see if your particular setup will work.. if it wont, i'll tell you straight up and recommend parts that will work.
you, sir iirc had a non standard setup which i had attempted to tune and then just lost contact with you.
if you have a setup close to one i have dyno tuned already then we shouldn't have any problems.. i have great tunes from 370cc/stock maf/t25 all the way up to 1200cc/72mm turbo/e85 just email or pm and i will see if your particular setup will work or recommend one that will.