Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

WorkInProgress · 05-05-2011, 07:48 PM

Thanks for all the responses guys. I got everything out today. This is the first time I've had to pull it all.

I've resurfaced everything with wire brush and some sand paper. I had a few studs come out instead of the nut coming off. When I go to put it all back together what should I use to get a good seal?

Permatex for the gaskets? Loctite on the studs?

Thanks again.

05-05-2011, 07:48 PM	#3
WorkInProgress Leaky Injector Join Date: Mar 2005 Location: MS Posts: 64 Trader Rating: (1)	Thanks for all the responses guys. I got everything out today. This is the first time I've had to pull it all. I've resurfaced everything with wire brush and some sand paper. I had a few studs come out instead of the nut coming off. When I go to put it all back together what should I use to get a good seal? Permatex for the gaskets? Loctite on the studs? Thanks again.