Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

daryl337 · 05-20-2011, 10:48 AM

I should probably elaborate for the TLDR version.

As long as you do not cut the seat too deep (dont go past 6.3mm deep) and you install new valves within the lengths that I have supplied.... you will have proper height. Your next step is to adjust your valve spring preload by adjusting the spring seat shims.

Hope that helps!

05-20-2011, 10:48 AM	#4
daryl337 Zilvia Junkie Join Date: Aug 2005 Location: Pac NW Age: 39 Posts: 589 Trader Rating: (1)	I should probably elaborate for the TLDR version. As long as you do not cut the seat too deep (dont go past 6.3mm deep) and you install new valves within the lengths that I have supplied.... you will have proper height. Your next step is to adjust your valve spring preload by adjusting the spring seat shims. Hope that helps! __________________ This is my clever and witty signature.