all these questions are honestly silly
stop worrying about the offset pretty much get the lowest you can
if you're going for the 326 look you're going to have to run a lot of camber and in the end you'll probably have to use spacers
326 runs -7 to -10 degrees of camber in the FRONT and some what less in the rear
right now on my S14 my fitment goes like this
stock fenders with flattened lips
-7 degrees front -6.5 rear
17x9 +22 front with 33mm spacer
18x10 +19 rear with 15 mm spacer
I could easily lower the car and it would be tucking like you want
its all in the camber
|