Quote:
Originally Posted by conrad_s13.5
u missed a ground somewhere im guessing
how much of the 'harness' did you take out?
|
A ground in the harness itself? i only depined a few pins from the harness and just kind of router them through the sleeves. I double check the ECU pins just to make sure all the colors were lined up in the ECU pin..
and I depin and took out some what i thought were unused
like pin 41
A/C on input (Air Con ON from A/C panel)
Blue Green
43
Power steering switch (speed proportional control output)
Purple White
and this green/yellow wire (I A/C )45
Pin
Ambient air tamp sensor input
Blue White
and
and theres this blue/red skinny wire that is not connecting to anything but it goes to one of the plugs near the injectors
here's a photo
I don't remember ever having this plug soldered , this is one of the wire that goes to the grey plug that connect to the chassis I just taped it off.
this is the wires/plug that I completely removed
