Quote:
Originally Posted by fliprayzin240sx
So for the guys running PBM Swirl Pots...where the hell did you guys get the fitting for the bleeder screw? I cant find anything small enough to fit that damn M6x1.0 thread.
|
Need more info...
My buddy has one. 4 fittings. Very bottom runs the lower radiator hose, next one up goes to the steam tube connected to the head, (LS3), next one up goes to the radiator, and the highest one goes to the overflow tank. You should be venting steam from the highest point on the head to the swirl pot. Which on a KA or SR, SHOULD be right by coolant temp. sensor. The swirl pot should be the highest point in the cooling system.
Hope that helps? Check Summit Racing. Thats where we got most of our fitting when we put the LS together. If you cant find anything small enough, go to Autozone or Lowes and just get a bigger pipe thread and drill it out and re tap it for a fitting that you can find.