okay so plugged in the same numbers and this is what i got from willitfit:
old/new
Diameter 615mm 606mm
Circumference 1932.1mm 1903.8mm
Poke 42.6mm 101.6mm
Inset 122.6mm 101.6mm
Speedo error 0% 1.49%
Reading at 30mph 30mph 30.45mph
Reading at 60mph 60mph 60.89mph
Ride height gain 0mm -4.5mm
Arch gap loss 0mm -4.5mm
So how would I go about seeing if I will hit lock to lock and not rub?
acutually it gives to reading from the speedo. well from the two diff sites....
__________________
R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE!
240 addict miata addict
|