Quote:
Originally Posted by codyace
You don't remove the bushing, just the metal inner bushing...that's the only part that spins in the bushing, not the entire thing. You should be able to put a socket against it, hammer it out half way, grease it, and then do it from the other side and repeat.
|
You're full of great ideas just like a nasty skank's snatch is full of herps.. Keep up the good work!
Quote:
|
Originally Posted by az_240
^Gotta take them apart for it to really do anything. I found white lithium grease is not good for these bushings.... it tends to make them stick and does not last as long.
The ES grease or other TEFLON based grease is best.
|
Awesome! I guess I wont be using my 'special' grease on them anymore..