Quote:
Originally Posted by zbarsuglia
I was wondering what would fit the best under a s14 kouki. ONLY ROLLED FENDERS NO PULL or WIDEBODY
i was looking into some weds kranze lxz and am wondering which size would fit the best.
FRONT: 18x9 +6(ws-lo disk) or -3(s-lo disk) or would 18x9.5 +3(s-lo disk) or -1(ws-lo disk)
REAR: 18x10 +6(ws-lo disk) or -3(s-lo disk) or 18x10.5 +3(s-lo disk) or -1(ws-lo disk)
im gunna have a bn sports type IV kit and want a fairly aggressive stance
any advice would be appreciated
|
If you don't even want to run a super slight pull in the back get the 9 -3 and 10 +6 set up.
The 9.5 -1 will fit up front with rolled fenders and 225/40s EASY, its only 1mm more aggressive then the 10 +7 I ran with 245s.
Out back is where you'll have issues, mostly because I don't remember what stock body fitment is. With a mild pull a 10.5 -1 will fit out back with 235/40s relatively easily. The 10 -3 is only 4mm further in, and the 10 +6 is obviously 9mm further in. You can roughly factor in 9mm of clearance per degree of camber as well, so you can take into consideration your alignment settings. In order for that 10 +6 to fit with a roll you're probably looking at a 235/40 and a good 3ยบ of negative camber....so if you ran 225/40s you can run about a half a degree less, which would mean you're going to run a 215/40 up front....this all equates to SUPER low with a BN kit.