Quote:
Originally Posted by JaredP
hoping this is the right place for some input. i have some 18x13 +6 offset wheels for the rear of my s13 hatch, 50mm widebody and looking for as little camber as possible..probably in the -2 to -3* range max for traction reasons. i plan on mounting them with 295/35 tires cuz i can get them at a decent price.
any input on how much camber? or pics of someone running similar sizing on a hatch? i was trying to find out how to bow the overs out to make them wider but everywhere i look i cant find out how.
|
Get the wheels/tires on, cut the stock fenders high, reweld them back shut, get a full alignment to what you want to run, make the overfenders fit. You basically rivet the top just to hold the overfenders in place, then you push the bottoms toward each other to bow the fenders out. Do that until you get the fenders over the wheel and then rivet it in place while bowed.
Honestly, you probably wont even have to bow the fenders out. I'm running 18x10.5 +10 rears on stock fenders. Using the wheel offset calculator, 18x13+6 will only stick out 35mm further out.