Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

racepar1 · 02-23-2012, 01:33 PM

I was planning on using these for another project, but have decided to go another route. These were originally part of a full bolt-in setup for a Z31 300zx, which I still have the rails for. One seat is nearly perfect. The upholstery is clean and has very little wear at all. The other seat is not so clean, but not bad. There are a couple wear spots and the lower bolsters are deformed a bit. The main problem with the second seat though is that the seat diaphragm is torn. This is the elastic/rubber support piece that actually supports your butt under the foam. These are easily sourceable and replaceable luckily. They go for a little under $50 brand new.

$400 OBO

NO SHIPPING!!!

02-23-2012, 01:33 PM	#1
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106)	Pair of old school recaros!!! I was planning on using these for another project, but have decided to go another route. These were originally part of a full bolt-in setup for a Z31 300zx, which I still have the rails for. One seat is nearly perfect. The upholstery is clean and has very little wear at all. The other seat is not so clean, but not bad. There are a couple wear spots and the lower bolsters are deformed a bit. The main problem with the second seat though is that the seat diaphragm is torn. This is the elastic/rubber support piece that actually supports your butt under the foam. These are easily sourceable and replaceable luckily. They go for a little under $50 brand new. *$400 OBO* NO SHIPPING!!! Last edited by racepar1; 02-23-2012 at 09:30 PM..