Quote:
Originally Posted by landins13
ok so i want to widen my wheels and here is the dilema
Wheels are Blitz type 03. currently the fronts are 17x9 and rears are 17x10. Everyone swears up and down that these wheels cannot be widened yet all four wheels are stamped 17x9+22 and the rears are 100% 10" wide and have slightly larger lips 4.5" vs 4" in front.
I would like to run the 17x10 up front and widen the 17x9 im not looking to make it have a huge lip i literally just want it wider. Does anyone have any info on who/how it can be done? And please do not tell me they cannot be widened since i have a set that already has been. Also the previous owner purchased them in this size, so he doesnt know either.
|
inner Bead to inner Bead measures 9 inches, if you are measuring from the edge of each lip to lip it will be approx. 10 inches.
Here are my Fronts, Work 18x8s
Bead to Bead = 8 inches wide
Overall width is aprox 9 inches
