Quote:
Originally Posted by EnemyS15
I bought 2 - 2 feet x 2 feet sheets @ around $60 a sheet. I was able to do the entire firewall, the usdm driver side frame rail, and the transmission hump. I still have a nice 10x10 square section left over. You have to get very crafty in a few sections (the bumps and indentations are a hassle). Total time, without any experience doing this sort of stuff, 4 hours.
|
Thats good info! I was curious on how much I would need?
So two 2x2 sections will be plenty?