[RBvert]

Ok so I'm in a big bind, I need to have my car running by sunday evening, but I had to pull my harness to repair some bad patches and a poor alarm install by a previous owner and to repair the fried ignition switch pigtail. So I lost the picture and diagram showing what wires went to what wires and now I'm screwed without help.

On the removable part of the ignition switch looking at the wires on the back from left to right I have:
Black w/Green stripe, White w/Red stripe, Blue, Black w/White Stripe, Black w/yellow stripe on the other end of the pigtail I have: Black w/white stripe, black w/yellow stripe, White, white w/blue stripe, white w/lavender has marks? and a black w/red stripe wire that was the cause of this mess because it started smoking while driving and then when the key is in the "on" position. I will try to upload pictures I took of the wires as they are now in the morning