[Hoffman5982]

Originally Posted by niscur29

Stop overpaying for these pre made sets and you will not have to worry about it.

You can easily DIY that shit for about 100 bucks.

You need:

3 M10x1.0 banjo fittings to 3 an male
JEGS Performance Products 100742 JEGS Brake Line Fitting Adapters
3 M10x1.0 to 3an male unions
JEGS Performance Products 100769 JEGS Brake Line Fitting Adapters

And then measure how long you need the three lines. I believe the drivers side is about 18", passenger is about 40", rear is a little less. But MEASURE and buy premade 3an teflon lines from summit jegs, hell even ebay and be done with it. There is NOTHING special about the CB kit except its 50% overpriced.

If you are relocating it, like the SG and CB kit, 40" is way too short.