ok sorry for the late update but ran into quiter a few issues.
there wont be many pictures this update because i bought a new phone and all the pics are on the other phone :/
but here we go
i ordered all the lines for the fuel and coolant system and all the hose ends and fittings.
all earls fittings and hoses very quality stuff but unfortuneately no pictures :/
tapped the water pump assembly and that is ready to go
but no pictures :/
i ran into a few issues i didnt like the way i was going to attatch to the heater core so i am going a different direction.
i had to pull the whole motor for the third time because i was unaware that the ls1 trans will not shift into 2,4,6 or R
GM no longer makes the piece for the GTO so i called sikky and they shipped me one right away
also took some advice from BBS350z and ordered new clutch master cylinder lines
quality stuff and no need to drill.
ordered a few clips for the throttle body because i am converting from drive by wire to cable driven
www.larryselectricsite.com had everything i needed
also got alot of planning done on the harness and more will be finished this weekend
enjoy