ok got lots done the past couple weeks
got all the wiring from the nissan ecu removed that will not be needed
figured out a bunch of power steering stuff
and got her to run on fuel for about 3-4 seconds
but heres the pics:
if you want to run the remote set up like mine you need the ls6 pressure line fitting so that the sikky pressure line will fit
mounted up the power steering cooler roughly where i want it
ran the lines up through where the stock vq intake runs
going to run a 1" aluminum tube to connect the upper and lower radiator hoses
removed almost all the nissan harness except for a few minors things
this
to this
sent the ecm to speed inc in chicago to get the base tune for my cam
remove the maf
remove the VATS
remove the Rear O2 sensors
and a bunch of stuff i cant remember
i cant figure out how to upload the video or i would
seems like it has an extended crank hoping that is because of the VATS but we will find out soon.
enjoy!