Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - CA SR20 short block part out, SR flywheel, S14 manual 5 speed sensor

Mark Slide Squad · 06-03-2012, 08:54 PM

So I have collected waaaay too much stuff over the past 15 years of doing this stuff. Located in Glendale 91203 for pick up for most items. Will ship smaller stuff (for an extra cost of course)...

S13 blacktop SR20DET bare block: Only had 35k miles on it when disassembled. Was bone stock and not abused. Was going to build a monster motor, but never happened. There is a slight scratch/gouge in the top surface, but it will come out when you deck it anyway. $50 picked up NO SHIPPING. Comes with main bearing caps.

S13 Blacktop SR20DET crank: this was not from the above block, from a different motor that spun a rod bearing. You can see it spun on one of the journals, the others have minor wear. Can it be fixed? I think so. A machine shop should be able to fix/polish it. $30 picked up NO SHIPPING.

S13 Redtop SR20DET crank: SOLD!

S13 Blacktop SR20DET upper oil pan: it's pretty clean and in good condition. $40 picked up or $60 shipped

S13 Blacktop SR20DET stock flywheel: came off the 35k mile block, in great shape, never been resurfaced. You could use it as is or resurface it if you want it perfect. $50 picked up or $75 shipped

S14 manual trans speed sensor: in good shape, works on SR20, KA or RB. SOLD!

S13 Redtop SR20DET Pistons and Rods: Rods are in perfect shape, pistons have wear on the skirts. SOLD

06-03-2012, 08:54 PM	#1
Mark Slide Squad Zilvia Junkie Join Date: Jan 2002 Posts: 511 Trader Rating: (16)	SR20 short block part out, SR flywheel, S14 manual 5 speed sensor So I have collected waaaay too much stuff over the past 15 years of doing this stuff. Located in Glendale 91203 for pick up for most items. Will ship smaller stuff (for an extra cost of course)... S13 blacktop SR20DET bare block: Only had 35k miles on it when disassembled. Was bone stock and not abused. Was going to build a monster motor, but never happened. There is a slight scratch/gouge in the top surface, but it will come out when you deck it anyway. $50 picked up NO SHIPPING. Comes with main bearing caps. S13 Blacktop SR20DET crank: this was not from the above block, from a different motor that spun a rod bearing. You can see it spun on one of the journals, the others have minor wear. Can it be fixed? I think so. A machine shop should be able to fix/polish it. $30 picked up NO SHIPPING. S13 Redtop SR20DET crank: SOLD! S13 Blacktop SR20DET upper oil pan: it's pretty clean and in good condition. $40 picked up or $60 shipped S13 Blacktop SR20DET stock flywheel: came off the 35k mile block, in great shape, never been resurfaced. You could use it as is or resurface it if you want it perfect. $50 picked up or $75 shipped S14 manual trans speed sensor: in good shape, works on SR20, KA or RB. SOLD! S13 Redtop SR20DET Pistons and Rods: Rods are in perfect shape, pistons have wear on the skirts. SOLD Last edited by Mark Slide Squad; 08-02-2012 at 10:27 PM..