Quote:
Originally Posted by norcals13
Anybody knows if the z32 tt ebrake set up will work on na hubs
|
E-brake assemblies are interchangable. It is the chassis that determine which cables you need to use. For S13 you need z32 2+2, for s14 you need R33.
Difference in z32 knuckles:
TT has HICAS so the toe arm / tie rod has a ball joint and NA has normal toe arm so the bushing is different at this location on the knuckle.
Difference in z32 rear hubs:
TT has larger spline count and will only work with TT/Q45 axles. The NA hubs accept s13/s14/j30 axles. The hubs themselves will directly bolt to s13/s14/z32 knuckles.
Difference in z32 axles:
TT has larger spline count at the wheel end and will only fit in z32 TT or Q45 hubs. The flange side is 6 bolt split pattern and fits TT or Q45 diff output flanges. NA has split 5 bolt pattern that match J30.
The only way to use TT hubs is to use a q45 diff which is an R200 housing but with the larger split 6 bolt output flanges, this requires the use of q45 drivers side axle and TT drivers side axle. Unless you have a need for using these parts just get NA hubs and use whatever knuckles you want.