Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

violak90 · 06-14-2012, 09:29 PM

I was given a few codes...EGR - there was clogged ports and a kinked hose; cleaned ports/intake, replaced hose.
MAF- replaced MAF
Knock - damaged wire from harness to sensor - replaced sub harness.
Replaced Cat (was at 36% efficiency)

Engine light only comes on at around 2500 RPM, normally when on freeway, and goes off when i get off freeway...tried to pull code from ECU, can't get one...

Any ideas?

Thanks.

06-14-2012, 09:29 PM	#1
violak90 Join Date: Mar 2012 Location: Sac Age: 34 Posts: 28 Trader Rating: (0)	s13 KA24de Check engine light I was given a few codes...EGR - there was clogged ports and a kinked hose; cleaned ports/intake, replaced hose. MAF- replaced MAF Knock - damaged wire from harness to sensor - replaced sub harness. Replaced Cat (was at 36% efficiency) Engine light only comes on at around 2500 RPM, normally when on freeway, and goes off when i get off freeway...tried to pull code from ECU, can't get one... Any ideas? Thanks.