Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

s0ldats · 05-23-2004, 12:41 PM

you don't need to remove anything, just mask everything off decently.

sand it w/ 180 grit, wipe down with acetone, and spray. after that clearcoat it if you wish, then wetsand with 1500 grit, buff, then wax.

05-23-2004, 12:41 PM	#4
s0ldats Zilvia Addict Join Date: May 2003 Location: so. cal Posts: 657 Trader Rating: (0)	you don't need to remove anything, just mask everything off decently. sand it w/ 180 grit, wipe down with acetone, and spray. after that clearcoat it if you wish, then wetsand with 1500 grit, buff, then wax.