Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

williamb82 · 06-30-2012, 11:32 AM

i have 3 mk2 supras. i just bought another pair of 16's about 20min ago so have 2 full sets of 16in full reverse mesh now. 1 set ill have the outer lips widened 1in in front and 2in in rear which will make them 16x8 +12 and 16x9 0 for my 86 mk2 which is getting a built motor with side draft webers, hks cams, etc...

the other set is going to be redone to 17x8 and 17x9.5 +12 all around for my 84 supra which is getting the 2jzgte and lt1 t56 etc.. both have tilton twin plate clutches, 1 piece driveshafts, etc.., though the 84 has wilwood big brakes front and rear, the 85 will have z32 calipers front and stock rears (wont be anywhere near as fast as my 84 so doesnt need as much stopping power).

i also have an 85 mk2 which will get the 17x7.5/17x8.5 +4 all around staggered set of rota rb's i bought a couple years ago. then i have some 16x7 enkie 92's with 0 offset and some 15x7 american racing mesh with 0 offset. keeping those as id like to find a 77 celica liftback to build and maybe a 85 celica gts coupe as well.

06-30-2012, 11:32 AM	#415
williamb82 Leaky Injector Join Date: Jan 2009 Location: Spring Hill, Fl Age: 42 Posts: 57 Trader Rating: (0)	i have 3 mk2 supras. i just bought another pair of 16's about 20min ago so have 2 full sets of 16in full reverse mesh now. 1 set ill have the outer lips widened 1in in front and 2in in rear which will make them 16x8 +12 and 16x9 0 for my 86 mk2 which is getting a built motor with side draft webers, hks cams, etc... the other set is going to be redone to 17x8 and 17x9.5 +12 all around for my 84 supra which is getting the 2jzgte and lt1 t56 etc.. both have tilton twin plate clutches, 1 piece driveshafts, etc.., though the 84 has wilwood big brakes front and rear, the 85 will have z32 calipers front and stock rears (wont be anywhere near as fast as my 84 so doesnt need as much stopping power). i also have an 85 mk2 which will get the 17x7.5/17x8.5 +4 all around staggered set of rota rb's i bought a couple years ago. then i have some 16x7 enkie 92's with 0 offset and some 15x7 american racing mesh with 0 offset. keeping those as id like to find a 77 celica liftback to build and maybe a 85 celica gts coupe as well. Last edited by williamb82; 06-30-2012 at 02:14 PM..