Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - replacing clutch, machine flywheel? what other parts needed?

Wookie384 · 07-23-2012, 08:09 PM

I always replace:
- Clutch disc & pressure plate
- Throw out bearing
- Pilot bushing/bearing
- Flywheel blots (and the ones for the pressure plate)
- Rear main seal

I always replace those and I always resurface the flywheel, I also inspect the fork for the throw out bearing and the pivot ball/bolt and replace as necessary.

07-23-2012, 08:09 PM	#5
Wookie384 Zilvia Addict Join Date: May 2007 Location: N. Hollywood / Burbank Age: 40 Posts: 766 Trader Rating: (10)	I always replace: - Clutch disc & pressure plate - Throw out bearing - Pilot bushing/bearing - Flywheel blots (and the ones for the pressure plate) - Rear main seal I always replace those and I always resurface the flywheel, I also inspect the fork for the throw out bearing and the pivot ball/bolt and replace as necessary.