Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Pressure plate bolts size and/or replacements.

jcruz85 · 07-28-2012, 10:40 AM

Just putting up some information which might already be on here but all i was really able to find was the thread and pitch of the clutch cover bolts which is 8x1.25x20mm. So found these on ebay ARP Cam Retainer Bolt High Black Oxide M8x1.25 20mm UHL Chevy 4.8 5.3 5.7 6.0L 672036023461 | eBay Also the clutch cover bolts for b series and dseries engine are the same thread and pitch if im not mistaken , as for overall length its pretty close might be a tad shorter. I opted for the ARP route since it was like $12 for like 8 of them. This might be useless information for some or it might be helpful for others...just putting it out there. IF THIS IS A REPOST AGAIN MY BAD.

07-28-2012, 10:40 AM	#1
jcruz85 Leaky Injector Join Date: Apr 2012 Location: New Jersey Age: 39 Posts: 53 Trader Rating: (0)	Pressure plate bolts size and/or replacements. Just putting up some information which might already be on here but all i was really able to find was the thread and pitch of the clutch cover bolts which is 8x1.25x20mm. So found these on ebay ARP Cam Retainer Bolt High Black Oxide M8x1.25 20mm UHL Chevy 4.8 5.3 5.7 6.0L 672036023461 \| eBay Also the clutch cover bolts for b series and dseries engine are the same thread and pitch if im not mistaken , as for overall length its pretty close might be a tad shorter. I opted for the ARP route since it was like $12 for like 8 of them. This might be useless information for some or it might be helpful for others...just putting it out there. IF THIS IS A REPOST AGAIN MY BAD.