Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

dws180sx · 08-08-2012, 03:19 PM

Hi, couldn't find a thread that answered my question, so I hope you guys can help.
I have a 92 180sx sr20det. The clutch was slipping really bad and was shot. So I put a new clutch in (PITA with that tranny, but got it in and out), I also had put in a new clutch slave cylinder.
After bleeding the master and slave cylinder plenty times and adjusting the pushrod on the master cylinder as much as possible, the clutch is still slipping!
Any ideas what the problem is??
Thanks!!

08-08-2012, 03:19 PM	#1
dws180sx Join Date: Aug 2012 Location: Sask, Canada Posts: 2 Trader Rating: (0)	HELP! New clutch still doesnt work! SR20 Hi, couldn't find a thread that answered my question, so I hope you guys can help. I have a 92 180sx sr20det. The clutch was slipping really bad and was shot. So I put a new clutch in (PITA with that tranny, but got it in and out), I also had put in a new clutch slave cylinder. After bleeding the master and slave cylinder plenty times and adjusting the pushrod on the master cylinder as much as possible, the clutch is still slipping! Any ideas what the problem is?? Thanks!!