Quote:
Originally Posted by GSXRJJordan
Really? 700+whp in a S13 with bias plies and skinnies to go high 9's?
Cmaaaaaaaaaaaaan 
|
time can be had with less but that will depend on the driver.
with me car i plan to pull that time with my curent power maybe a tad more.
Quote:
Originally Posted by b14 se-rious
480 whp was made with this setup on 17 psi
Tomei 272 cams
Stock head
Arp studs and Cometic HG
ACL race bearings
Stock bottom end
Peakboost manifold
SC6176 on a .82 housing (I started my build before these billet units were out)
Intake Manifold
100 MM throttle body
Haltech E8
Next setup plans to be VVL head , 8500 RPM and 25-28 psi on E85 with a lot more timing through the entire powerband.
|
what kind of timing are you running now? i recommend going E85 now and run it and see where you are at. I am close to the powerrange you want to be at and like you i have a stock head as well reving to 8100 without solid lifters.