Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Purestock240 · 10-19-2012, 09:12 AM

I pulled the MAF and the intake pipe off, the car had an s14 twin cam MAF on it and a crack in the plastic pipe between the MAF and the turbo, i'll be wiring a ka24e maf into it today. hopefully that fixes the ignition problems.

also I didn't want to start a new thread for this. But I was in contact with the previous owner and asked what else had been done to the car. He said it has aftermarket cams in it and waste gate. I couldn't find any markings on the cam other than the ones pictured. anyone know if these are stock or what they are?

EDIT: just realized my pictures are blurry, I'll try to get clear ones later

10-19-2012, 09:12 AM	#8
Purestock240 Zilvia FREAK! Join Date: Aug 2010 Location: On, Canada Age: 30 Posts: 1,158 Trader Rating: (8)	I pulled the MAF and the intake pipe off, the car had an s14 twin cam MAF on it and a crack in the plastic pipe between the MAF and the turbo, i'll be wiring a ka24e maf into it today. hopefully that fixes the ignition problems. also I didn't want to start a new thread for this. But I was in contact with the previous owner and asked what else had been done to the car. He said it has aftermarket cams in it and waste gate. I couldn't find any markings on the cam other than the ones pictured. anyone know if these are stock or what they are? EDIT: just realized my pictures are blurry, I'll try to get clear ones later