|
Just buy the .64 turbine. If you already have an upgraded outlet, then great -- if not, you should probably get one. It will bolt up just fine.
AtP can answer the housing thing -- I'm running the 3" inlet. It's easy enough to built an intake, and you won't really want to run the stock rubber piece anyway.
You clearly need to do more research. Look at a 2871 setup and see what you need -- it's the same for this. Buy new hardware and gaskets from frsport or something. 7 layer s15 exhaust manifold gasket, copper lock nuts, locking tabs, multi layer intlet gasket, new 5 bolt gasket. might even be easier to just find an extra stock manifold and put everything together. I'd also recommend stainless braided lines as it makes installation easier.
For 300whp, I think an s15 turbo would suit you better, fwiw.
edit: USDM, looks like you're making the same 340/300 on a mustang like I am, but at 17psi versus 15psi, and looks like a bit later spool. Prob not worth the upgrade.
|