UPDATE:
Conducted another boost leak check, found a few pin hole leaks in silicone boot seals, sealed them up, and now no leaks(tested to 15psi).
Chased out the Knock Sensor code. Can't seem to find anything wrong.
When disconnected she runs no differently.
Chased out the MAFS code. Again, can't seem to find anything wrong.
I have noticed that during idle when she stumbles(feels like a misfire) that the A/F ratio leans out temporarily. I am hoping to borrow a know good fuel rail, FPR, and injectors from a friend and see if that's the issue.
Might not be able to get my hands on that until the day after tomorrow.
I'm open to other suggestions in the mean time, I've got a day to kill anyway.
Jake
|