Quote:
Originally Posted by 36chambers
"You have to use the OEM front bumper harness where the old Chuki Lights were and use the Green wire from the harness and 1 other one..can't remeber which one."
I read it, I don't think you did...  Since you have the time to comment than answer the question what goes with the green wire for the turn signals. |
for the turn signals on the 96-98 180sx front bumper
the wire you are looking for if you cut the original 1157 socket is green with a yellow stripe and use the black wire for ground done
for the position lights you will use the wire that is all green and that will go to the red wire on the position socket and for the black wire use the same ground as the turn signal
