Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - CA S13 tein HR coilovers, KA-t, s14 suspension/interior, s13/s14 tuned ecu, stock SR20

edmorl · 01-28-2013, 07:02 AM

After going through too many s-chassis' this year, it's time to clear the garage of left over parts! PM for quickest response

1991 Skyline R32 GTST front brake calipers - 250$ shipped

Master Power turbo - T3/T4 48 Trim Stg 3 .48 A/R - Master Power Part# 810019 - 250$ shipped

minimal shaft play, came as an extra part with a car I bought

SS oil line - 50$ shipped

S13 TEIN HR coilovers. 3 are leaking, but they go low as see on my buddy's s13. - 480$ shipped

S13 KA24DE valve cover - 50$ shipped

S13/S14 Spats front strut bar. Very rare. - 80$ shipped

S14 crossmember - 100$ + shipping

1995 240sx S14 Canadian gauge cluster in KM/H - 75$ shipped
pretty rare to find in KM/H

S14 NON-ABS BMC with pigtail. - 60$ shipped

S13 front spindles, calipers, brake pads, brake lines, drilled rotors, hubs, bearings - 100$ + shipping

S14 cluster bezel with buttons - 50$ shipped

SR20 coolant lines, includes the rear lines to hook up to a LHD S13 and a radiator line - 40$ shipped

Bully stage 2 clutch, also says exedy on the clutch disc. Only installed, engine never ran. Clutch, pressure plate, machined flywheel. The clutch was 450$, machining the flywheel was 50$ (with my own flywheel). 350$ shipped

Gates serpentine belts for S13 SR20 (does not include AC belt). Only installed, never used. - 30$ shipped

OEM Nissan FAT 02 sensor for s13 SR20DET blacktop, only installed, engine never ran - 80$ shipped

Part # 22690-50F03

s13 SR20DET blacktop ignitor chip. Came with the engine, never got around to having it running. - 40$ shipped

Sr20DET s13 blacktop coilpacks. Came with the engine, never got around to having it running. - 150$ shipped

NGK Irridium IX spark plugs for s13 sr20det blacktop. BKR7EIX. Installed but engine never ran. - 30$ shipped

S13 SR20 blacktop starter, came with the engine. - 100$ shipped

S13 SR20DET blacktop intake manifold - 100$ shipped

SR20 Nismo thermostat in housing. Only installed, engine never ran. - 100$ shipped

S13 SR20 IACV and everything attached to it in this picture. - 120$ shipped

S13 blacktop Sr20 throttle body with upper intake manifold - 100$ shipped

SR20 OEM Nissan water pump. Only installed, engine never ran - 60$ shipped

s13 sr20 exhaust manifold - 100$ shipped

s13 sr20 blacktop coilpack harness - 40$ shipped

s13 sr20 alternator - 120$ shipped

ECU 62 chipped by Almasi Tuning for 550cc injectors and Z32 Maf - 300$ shipped

Bought it off a member on here but never used it.

ECU #42 Pulled from a 1993 Nissan 240sx. Automatic transmission with hicas and KA24DE engine. - 60$ shipped

S13 climate control pulled from a 1993 hatch. - 40$ shipped

HW s14 KA24DE ECU pulled from a 95-96 Automatic - 70$ shipped

3C s14 KA24DE ECU pulled from a 95 manual - 70$ shipped

01-28-2013, 07:02 AM	#1
edmorl Zilvia FREAK! Join Date: Feb 2010 Location: Ontario Age: 32 Posts: 1,427 Trader Rating: (24)	S13 tein HR coilovers, KA-t, s14 suspension/interior, s13/s14 tuned ecu, stock SR20 After going through too many s-chassis' this year, it's time to clear the garage of left over parts! PM for quickest response 1991 Skyline R32 GTST front brake calipers - 250$ shipped Master Power turbo - T3/T4 48 Trim Stg 3 .48 A/R - Master Power Part# 810019 - 250$ shipped minimal shaft play, came as an extra part with a car I bought SS oil line - 50$ shipped S13 TEIN HR coilovers. 3 are leaking, but they go low as see on my buddy's s13. - 480$ shipped S13 KA24DE valve cover - 50$ shipped S13/S14 Spats front strut bar. Very rare. - 80$ shipped S14 crossmember - 100$ + shipping 1995 240sx S14 Canadian gauge cluster in KM/H - 75$ shipped pretty rare to find in KM/H S14 NON-ABS BMC with pigtail. - 60$ shipped S13 front spindles, calipers, brake pads, brake lines, drilled rotors, hubs, bearings - 100$ + shipping S14 cluster bezel with buttons - 50$ shipped SR20 coolant lines, includes the rear lines to hook up to a LHD S13 and a radiator line - 40$ shipped Bully stage 2 clutch, also says exedy on the clutch disc. Only installed, engine never ran. Clutch, pressure plate, machined flywheel. The clutch was 450$, machining the flywheel was 50$ (with my own flywheel). 350$ shipped Gates serpentine belts for S13 SR20 (does not include AC belt). Only installed, never used. - 30$ shipped OEM Nissan FAT 02 sensor for s13 SR20DET blacktop, only installed, engine never ran - 80$ shipped Part # 22690-50F03 s13 SR20DET blacktop ignitor chip. Came with the engine, never got around to having it running. - 40$ shipped Sr20DET s13 blacktop coilpacks. Came with the engine, never got around to having it running. - 150$ shipped NGK Irridium IX spark plugs for s13 sr20det blacktop. BKR7EIX. Installed but engine never ran. - 30$ shipped S13 SR20 blacktop starter, came with the engine. - 100$ shipped S13 SR20DET blacktop intake manifold - 100$ shipped SR20 Nismo thermostat in housing. Only installed, engine never ran. - 100$ shipped S13 SR20 IACV and everything attached to it in this picture. - 120$ shipped S13 blacktop Sr20 throttle body with upper intake manifold - 100$ shipped SR20 OEM Nissan water pump. Only installed, engine never ran - 60$ shipped s13 sr20 exhaust manifold - 100$ shipped s13 sr20 blacktop coilpack harness - 40$ shipped s13 sr20 alternator - 120$ shipped ECU 62 chipped by Almasi Tuning for 550cc injectors and Z32 Maf - 300$ shipped Bought it off a member on here but never used it. ECU #42 Pulled from a 1993 Nissan 240sx. Automatic transmission with hicas and KA24DE engine. - 60$ shipped S13 climate control pulled from a 1993 hatch. - 40$ shipped HW s14 KA24DE ECU pulled from a 95-96 Automatic - 70$ shipped 3C s14 KA24DE ECU pulled from a 95 manual - 70$ shipped