Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - GA REPLACE your busted S15 turbo with a POWER ENTERPRISE

jamg · 02-07-2013, 02:46 PM

S15 turbo specs-
0.64 A/R Turbine Housing / 62 Trim
.60 A/R Compressor Housing / 60 Trim Wheel

IHI VN14 (Power Enterprise 1420)-
Dual Ball bearing turbocharger
Inducer
1.79"/45.5mm
Exducer
2.37"/60mm

Turbine
Exducer
1.73"/44
Inducer
1.89"/48mm

Flow Chart-

Doing the math-

1 m3/min = 35.314 CFM x .076 = 2.68 lbs/min 2.25 bar at roughly 74% efficiency

2.68 lbs/min x 13.5 = 36.18/min (The S15 flows at 31lb/min)

With that said, there is NO shaft play. It's a dual ball bearing turbo.

$550 + paypal fee + $8.00 shipping

paypal:

[email protected]

02-07-2013, 02:46 PM	#1
jamg Nissanaholic! Join Date: May 2009 Location: GA Posts: 2,106 Trader Rating: (7)	REPLACE your busted S15 turbo with a POWER ENTERPRISE S15 turbo specs- 0.64 A/R Turbine Housing / 62 Trim .60 A/R Compressor Housing / 60 Trim Wheel IHI VN14 (Power Enterprise 1420)- Dual Ball bearing turbocharger Inducer 1.79"/45.5mm Exducer 2.37"/60mm Turbine Exducer 1.73"/44 Inducer 1.89"/48mm Flow Chart- Doing the math- 1 m3/min = 35.314 CFM x .076 = 2.68 lbs/min 2.25 bar at roughly 74% efficiency 2.68 lbs/min x 13.5 = 36.18/min (The S15 flows at 31lb/min) With that said, there is NO shaft play. It's a dual ball bearing turbo. $550 + paypal fee + $8.00 shipping paypal: [email protected]