Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

rcdad123 · 02-16-2013, 01:26 AM

are you sure you did not get over sized bearings? you should be able to turn the crank by hand(without using a tool) if the pistons are not in the bores. remove the bearings and check part numbers to make sure they are not over sized.

02-16-2013, 01:26 AM	#2
rcdad123 Zilvia Addict Join Date: Jul 2011 Location: san diego Posts: 639 Trader Rating: (0)	are you sure you did not get over sized bearings? you should be able to turn the crank by hand(without using a tool) if the pistons are not in the bores. remove the bearings and check part numbers to make sure they are not over sized.