Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

GoinSidewayz · 03-11-2013, 12:47 PM

I recently bought this s13 which had a push button hack job. Whenever I would crank the car it would start but my car wouldnt go past 4,000 rpm. Almost seemed like the ECU wasnt turning on. I thought fixing the push button and putting the ignition back to stock would fit it but it still has not. The car will drive normally though if while im driving i turn the car off then i pop the clutch to start it. Almost seems if i do that the ECU turns on and the cars runs normally after that. I don't want to keep having to do this procedure everytime i drive my car. If anybody has any ideas feel free to chime in. Thanks.

03-11-2013, 12:47 PM	#1
GoinSidewayz Join Date: Dec 2011 Location: AZ Age: 34 Posts: 4 Trader Rating: (0)	S13 ECU problem??? I recently bought this s13 which had a push button hack job. Whenever I would crank the car it would start but my car wouldnt go past 4,000 rpm. Almost seemed like the ECU wasnt turning on. I thought fixing the push button and putting the ignition back to stock would fit it but it still has not. The car will drive normally though if while im driving i turn the car off then i pop the clutch to start it. Almost seems if i do that the ECU turns on and the cars runs normally after that. I don't want to keep having to do this procedure everytime i drive my car. If anybody has any ideas feel free to chime in. Thanks.