Quote:
Originally Posted by ForeignMuscle
I think the gto alt bracket interferes on the s13 doesn't it?
|
i dont think it interferes, but i'm not 100% sure though
Quote:
Originally Posted by Slideways74
You should get GTO accessory brackets to mount that ugly alternator down low where it can't be seen.
Looks good by the way.
|
i went with the C5 accessories for the extra 3/4" of pulley to radiator clearance. not to mention, putting the alternator down lower would interfere with my header collectors. Thanks!
Quote:
Originally Posted by OrangeVirus1
Can I ask why? I'd bet it's undrive-able in boost
|
no particular reason, other than i wanted to. it should still be driveable at around 600whp, maybe not until top of 3rd gear though
Quote:
Originally Posted by moco
Did you have to do modified the transmission tunnel in any way?
|
i did have to do a little bit of banging to clear the bell housing. not too much.
Quote:
Originally Posted by pigeon
Paint looks great. Your running just the one 044 or do you also have one in tank?
|
just that 1 external for now. should be plenty for my goals.....if not, i can add a 2nd one easily
Quote:
Originally Posted by 2muchboost
Absolutely nuts my friend....I love it
|
Thanks!
Quote:
Originally Posted by 240boi115
holy hell this build is the shizzz!!!
|
Thanks!
Quote:
Originally Posted by Royal_T
Wow very sick build and you are not far from me at all.. Might have to check it out one day..
|
Where in Austin are you? i'm down south over by ABIA. I definitely want to check yours out too. i've been following you build on ls1tech. Has Russell been doing a lot of you work? I haven't talked to him in years....he's come a long damn way.
Quote:
Originally Posted by ShadowMan
Damn, that's some really nice work on the headers, and the entire exhaust for that matter. I'll nkeep this in mind if I ever go with an LS. Awesome man.
|
Thanks man! just had to get a little creative
Quote:
Originally Posted by ryans523
something ive always wanted to do, looking good!
|
Thanks
Quote:
Originally Posted by revenn
Looking awesome man keep it up!
|
Thanks!
Quote:
Originally Posted by slow92
Wow looks good keep up the good work
|
Thanks
Quote:
Originally Posted by iStubz
loving the wheel choice, different but sick.
and you crazy to boost an LS!
|
Thanks. i've been in love with these wheels ever since the FR500 concept came out. I was originally going to go with the Black Chrome version, but when i found out about these, i decided to wait 8 months for the backorder to be filled.
Quote:
Originally Posted by BlewByYou
Sweet build
|
Thanks
Quote:
Originally Posted by Nissansota240
Nice build, looks like its coming along nice, are you making a shroud for around the intake filter? I had a similar setup on mine but any extreme amount of driving in the rain would allow it to suck in ridiculous amounts of water.
|
No shroud. i've changed the intake from what's pictured and tucks more into the bumper. plus, i dont plan to drive it all that much in the rain.
Quote:
Originally Posted by Oakville
Holy fap that bay paint looks awesome.
|
Thanks! first time painter here. i think it came out pretty good. there are a couple of runs, but hey, it's just the bay! i'll pay a little more attention to the exterior when that time comes.
Quote:
Originally Posted by Fable
wow man sick build you got going on here with some awesome fabrication
|
i appreciate it!
Quote:
Originally Posted by bc.
wow, you are a psychopath.
|
my wife has said that to me before.