04-01-2013, 08:46 PM
|
#67
|
|
Post Whore!
Join Date: Dec 2004
Location: Poconos, PA
Age: 40
Posts: 8,030
|
Quote:
Originally Posted by cotbu
set it back and drive it for a few temps cycles.
After everything you've been through, I suggest you check base timing and set idle. You could fix this issue right then, or Do this.... set it to .45v let the temp reach 80 deg C, drive maybe 10mins, your idle should be found and stable but probably too low, if the screw is all the way down. move it up to stop the stalling.
When I fix this issue, I use temps, but you could use time if you can't control the engine fan
The IACV screw should never be all the way up or down. when everything is set and working properly.
|
100% Agreed. Also never hurts to get the TPS reset and re sort out the IACV/idle screw too.
__________________
Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!
Quest Alternator Conversions for SR20! Check my Group Buy!
Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy
|
|
|