Quote:
Originally Posted by cotbu
Sorry, your looking for idle! so crack open the throttle plate until you have a stable idle. I don't know what else to tell you. Yes the voltage for the TPS will change as the throttle opens, once you have a stable idle, set the tps to .45v. This is what should happen when you're almost finished. You go for a test drive come to a stop you idle will probably be high 1200rpm maybe, if so take a screwdriver and adjust the IACV to lower that rpm
I prefer under 1000rpm, once you do that you should be done, but i would go all he way back to checking base timing and idle, but you shouldn't have to.
|
Roger that. So adjust Throttle plate then TPS then IACV. I'll mess with it some tommorow . Should the throttle plate be adjusted while the TPS is plugged in or out ?