Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Chase Bays Brake line

SaVAgES14 · 05-08-2013, 11:53 PM

The primary lines that go to the front calipers are installed in the two ports towards the rear of the bmc. The line from the proportioning valve that goes towards the rear of the car is installed on the port at the front of the bmc. Please someone chime in if im wrong. I still have to install my z32 bmc as well. I believe this is for non-abs? If so you have to install that 3rd fitting.

05-08-2013, 11:53 PM	#4
SaVAgES14 Zilvia Junkie Join Date: Apr 2011 Location: San Diego Posts: 458 Trader Rating: (14)	The primary lines that go to the front calipers are installed in the two ports towards the rear of the bmc. The line from the proportioning valve that goes towards the rear of the car is installed on the port at the front of the bmc. Please someone chime in if im wrong. I still have to install my z32 bmc as well. I believe this is for non-abs? If so you have to install that 3rd fitting. Last edited by SaVAgES14; 05-09-2013 at 01:58 AM..