|
I checked all of those previously but i found the problem.
The ground for the mafs on the harness was faulty. Wasn't grounded to anything so I hardwired it and it runs ok...well it did. The first actual boost blew off a hose right away. It pulled awesome but after putting it back on i can't get it back to normal. I have the bov, a cheap bosch, hooked to the fpr vacuum along with my gauge and vented back into the intake pointing towards the compressor. Now all the boost is hard to get and extremely uneven. Very odd acceleration. Really jerky. It's getting hard to get the bov to vent. Have to rev pretty hard. I've checked and checked for leaks but i can't find anything. I'm lost again.
|