Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

tapdeznutz · 06-05-2013, 11:57 AM

just throwing my recent experience on this matter. I just picked up a used 1pc steel no name from another member on here. My first impression was visually the 1pc i picked up was about 1/2" shorter than my OEM non-abs 5 spd DS. It was a concern but i installed it anyways. Its been in for about 2 months now and there is some additional sound on decel in gear and lots more in decel in neutral. It seem to help the entire RPM range but more so in the low to mid range.

I do question the noise i am hearing and wonder if it needs a speed balance. I did check for any type of play from the u-joints and did not feel any. Anyways, mods i have are: Stock Ka24E with Grounding Kit, Intake, Headers, 2.5" resonated test pipe to 2/5" HKS HiPower exhaust, and ASP Aluminum crank pulley.

06-05-2013, 11:57 AM	#48
tapdeznutz Nissanaholic! Join Date: May 2011 Location: Long Beach Age: 44 Posts: 1,801 Trader Rating: (50)	just throwing my recent experience on this matter. I just picked up a used 1pc steel no name from another member on here. My first impression was visually the 1pc i picked up was about 1/2" shorter than my OEM non-abs 5 spd DS. It was a concern but i installed it anyways. Its been in for about 2 months now and there is some additional sound on decel in gear and lots more in decel in neutral. It seem to help the entire RPM range but more so in the low to mid range. I do question the noise i am hearing and wonder if it needs a speed balance. I did check for any type of play from the u-joints and did not feel any. Anyways, mods i have are: Stock Ka24E with Grounding Kit, Intake, Headers, 2.5" resonated test pipe to 2/5" HKS HiPower exhaust, and ASP Aluminum crank pulley. __________________ FS: DSS 1pc Steel Non ABS, 6bolt axles WTB: Boost Gauge, Hatch Roof Wing Last edited by tapdeznutz; 07-16-2013 at 12:31 PM..